A Guide to Changing Your Garage Door Remote Batteries

Man by using remote garage opens in a cloudy day

From the outside, garage doors are typically opened using either a keypad or remote. The remote is an especially convenient way to open the garage door while remaining in the vehicle. Over time, remote openers may begin to require several presses in order to open the door. In such instances, the solution may be as simple as replacing the battery. Below are three simple steps for changing your garage door remote batteries.

Step 1: Remove the Battery Cover

On many remote garage door openers, the battery cover is often located on the back of the device. In this case, the cover may be opened by pressing the back piece of the device and sliding it back. Other remotes have covers with no discernable battery covers. These can usually be opened by splitting the remote into two pieces. A small screwdriver will assist with battery covers attached with a screw.

Step 2: Identify the Battery Type and Obtain a Replacement

Remove the battery from the remote. Most may easily be pulled or popped out of the remote. Many remote batteries are small, round, silver in color, and flat on the top and bottom. Such batteries come in specific sizes. The battery will have the type and size identified on the side as a series of numbers. A safe option is to simply take the exhausted battery to a store where the staff will provide the appropriate replacement. 

Step 3: Replace and Reprogram

Place the replacement battery or batteries in the remote, facing them in the correct direction as indicated on the remote. Replace the cover using the reverse process which was used to remove it. Once the battery has been replaced, the remote may need to be reprogrammed to operate correctly with the garage door. The manufacturer of the remote provides instructions for reprogramming, which can be accessed online.

Garage door remote openers can often be rejuvenated by inserting a new battery or batteries. This process can be accomplished by removing the cover, replacing the battery, and reprogramming the remote. Following these steps as listed above, batteries can be replaced quickly and easily, allowing the user to enjoy the remote as it is designed to function: consistently opening the garage door on the first attempt. 

For more information about how to maintain your garage door and opener, visit the Thomas V. Giel Garage Doors, Inc. blog.