Spring signals a time of change for a lot of people. Spring cleaning starts, days get longer, and flowers start blooming. It’s also a time when the rust and the elements of winter start to make themselves known. As the outdoors begin to thaw, start to consider replacing worn, weathered, and rusted equipment like garage doors. Spring isn’t just a convenient time to replace a rusty or outdated garage door, it’s usually the perfect time to replace a garage door at Giel Garage Doors. Most companies have the best deals of the year during spring when the weather gets better and tax returns are coming in, putting buyers in the best possible situation. Giel Garage Doors offers garage door options from a wide variety of manufacturers , allowing you to find the best option for your needs and negotiate a good price!

There a few more reasons to consider replacing your garage door, other than just cost.Every garage door implements a spring system that counterbalances the weight of the door. After a long, cold winter it’s not uncommon for these springs to break. Replacing springs in the cold months isn’t something usually recommended by garage technicians. However, Spring is the perfect weather for checking and replacing not only the springs, but the garage door itself, with the assistance of a garage door specialist. Make this spring not only productive, but preemptive against future garage door problems. Precautions taken this spring will prevent summertime disasters with your garage door. Assess your garage door needs for replacement or maintenance and contact Giel Garage Doors !

Many homeowners try to save a few bucks wherever they can by implementing DIY repairs around the house. For most common home repairs, this method works quite well. Generally a trip to the local hardware store and some time spent on YouTube or other internet sites will give you the information that you need to perform the repair. Garage door repairs , on the other hand, are a completely different matter, one that should be left to garage door repair experts and not a DIY homeowner.

Here are four reasons why is it imperative that you hire a professional, certified garage door technician to perform all repairs on your garage door:

Garage doors are dangerous

There are a variety of components that make up a garage door with many of them working together. If the garage door is not working properly, it can be dangerous to try and fix it yourself. Garage doors are heavy and large, which makes working on them awkward and dangerous if you do not know what you are doing. The door itself is not the only concern when repairing a garage door; there are tightly wound springs, electrical components, and moving parts. Faulty garage door springs can be especially dangerous if they unexpectedly fail.

You can make the problem worse

Often times when homeowners attempt their own garage door repairs, they don’t know what they are doing. Attempting to fix the problem on your own can lead to more problems (some of which are irreversible), or working on a part that doesn’t need to be fixed, in an attempt to correct the initial problem. Either way,attempting to repair your garage door yourself is not a good idea for the DIY homeowner.

Safety Concerns

Garage doors are heavy, weighing more than 150 pounds on average (depending on the size and material). That is a lot of weight to be messing around with. If you accidently pull the wrong part off, the garage door could come crashing down on you, your car, a pet, or anything between the door and the floor. Another concern with a falling door is they often times cause damage to the floor as well, which is another expensethat you as the homeowner will have to cover.

Increased Cost

If none of the other reasons have deterred you from attempting to DIY garage door repairs, maybe the thought of having to spend more money will. Every garage door has very specific requirements when it comes to replacement parts and materials. As a DIY homeowner,it’s likely that you don’t know the correct parts to buy, but may purchase what you think will work in an attempt to avoid the cost of professional labor. Using the wrong parts for your door could potentially lead to more damage, continued lack of functionality, or physical harm. When the functionality fails, you’ll have no choice but to call a garage door technician,and the entire ordeal will end up costing you more than if you had called them initially.

Contact your local garage door technician

For all your garage door repair Pittsburgh, contact Giel Garage Doors . We will be able to repair any garage door, saving you money and possible injury.

In part one of this two-part series, we talked about how experience, security, and insurance are important things to consider which choosing a company to install your garage door, entry/storm door, awning, or screen. Choosing the right company is just as big of a decision as picking which type of door and color you want on the outside of your home. In part two we will be looking at workmanship, warranties, and code compliance.

Workmanship

Workmanship is a measure of the quality of a company’s work. It relates to experience in a way. This is where a visit to a past job is helpful. As mentioned in the last post, call references! Ask them about the quality of the work and what they thought of the installers. Ask specific questions about whether the installers arrived in a timely manner, if they were courteous and focused, and if they cleaned up after themselves.

Look at the company’s trucks. Do the name and phone number appear on the vehicle? Company vehicles are one of the first outward signs of how the company is run and how your job will be treated. The trucks don’t have to be brand new, just well maintained, clean, and neat. This is often a reflection of the kind of treatment you will receive when the installers arrive at your home.

Ask about the average length of time employees have been with the company. This speaks volumes about the way the employees are treated. They generally don’t stay with a company that doesn’t treat their customers well. It takes more than a year or two to become a competent technician and installer, therefore, it is a good idea to ask about the training programs utilized for new employees and how veterans are kept up to date on their skills and industry changes. Companies with long term employees have an environment to allow for skills to be passed down from generation to generation.

Warranties

The real test of how much faith a contractor has in his own ability is reflected in the warranty he offers. A reputable contractor will generally offer some form of a “Written Labor Warranty.” Not one that is handwritten in the comment section of the bid, but one that is printed on the contractor’s estimate or proposal form as well as their literature.

In addition, the paperwork should list the manufacturers of the products they install along with the manufacturer’s warranty. Reputable manufacturers will have a printed warranty to accompany the product. Demand a copy of it before you pay for the work and read it! Don’t wait until you have a problem before you read it. Lastly, make sure you understand what you get and what you don’t get. Your contractor should be able to explain it clearly and give references of customers who used their warranty and will share their experiences.

Code and Regulatory Compliance

Building codes and safety regulations have been legislated to protect the installers and the homeowners. Find out how knowledgeable your contractor is about local building codes, industry safety practices, and government regulations. The best way to do this is by asking people you know who know about these matters. You are not trying to be an expert, but just be aware of some of the major concepts. Finally, don’t be afraid to ask them about the content of their training programs, it should be documented.

When selecting an installation company for your garage door, entry/storm door, awning, or screen, it is important that you examine the company itself and not just the product you are buying. The six areas you should consider are experience, workmanship, code compliance, security, warranties, and insurance. This post will cover experience, security, and insurance.

Experience

Experience means that the company and its employees can tackle your job efficiently and do it correctly. If something is novel about your job, they will have the knowledge to solve it quickly. Look at the company with longevity.

Beware of national franchise operations because franchises will normally have short ownership cycles. When you need to call for service (three to five years from installation) they are no longer in business and the next franchise owner is not responsible for helping you. Companies that have been around a long time usually have satisfied customers because they would not stay in business without them.

Find out how long the company has been installing its products and the range of models within each product. Is the job standard or will it require special work? Don’t be afraid to ask for references and call them.

Don’t forget; no contractor will give you a bad reference. However, after you have talked to a few, you should get a good sense of this contractor’s habits. Ask if they belong to the Better Business Bureau. If they do, you can contact the BBB to see if there have been any recent complaints and how they were handled. A company that asks you questions to understand your wants and needs and takes the time to give a full presentation has usually taken the time to relate their experience through the presentation they give.

Finally, do they offer educational information on their website? Take advantage of it so you are informed on the major issues prior to speaking to a representative.

Security

Having strange men in your home can make you apprehensive or uncomfortable. You can reduce this feeling by finding a contractor who screens his employees. Ask about the screening process and how often follow-up screens are done. You’re about to have strangers come into your homes and they may be there for a day or two. Don’t be shy about your family’s safety! Demand that your contractor performs semi-annual background checks and that all new employees or hires are checked before their first day.

Insurance

A contractor who is not properly insured can put you at substantial financial risk! For example, if a worker gets hurt on your property and the contractor does not carry workman’s compensation insurance, that injured worker can look to you to pay all of his medical bills related to that injury. Make sure the company has workman’s compensation and liability insurance through a well-known and Best’s rated firm. Insist on seeing a copy of the insurance policy binder. Don’t be impressed by someone who says he is self-insured. Often this means NOT insured. Maybe even not insurable!

Thomas V. Giel Garage Doors serves a 50-mile radius around Pittsburgh with all things garage doors, entry doors, awnings, and screens. We are the local experts with over 65 years of industry experience.

The opener is the electric appliance that opens and closes the garage door . They can be activated by push button, key switch or by a radio remote control. The radio frequencies have been refined to prevent the doors from automatically opening. Remember, the spring is actually the “motor” of the door. The electric opener or your arm is the “cruise control” of the door.

The weight of the door is supposed to be handled by the spring. If your door is becoming harder to open, it does not always mean you need new springs or an opener. Assuming there are no other impediments, you may only need a spring adjustment.

There are three types of drive mechanisms on openers: Belt, Chain, and Screw.

Openers having either a belt drive or chain drive move the belt/chain along a path between a gear on top of the motor of the opener and another gear located where the opener attaches to the door frame. You may not be able to see this on an installed opener, but it is there.

The garage door is attached by a “trolley” that moves along a track and is attached to the door by a bar called an arm. As the motor turns the gear, the belt or chain is moved by this rotating gear thus moving the trolley and opening or closing the door.

However, the screw drive has a steel screw inside aluminum housing. As the motor turns the screw in the housing, the trolley is drawn toward or pushed away from the motor, opening or closing the door. All three, when new, have the same strength in lifting ability. Therefore, the major determinant is quietness of operation over time.

The screw drive is very quiet for the first year or so but as the aluminum housing is worn by the friction against the steel, the housing becomes loose. What starts as a gentle whirring sound, soon becomes a deafening grinding sound, loud enough that a conversation is impossible while the opener is running. Lubrication will dampen the sound but it will return eventually.

The chain drive parts work with other metal parts and in time will wear. Metal gears driving a metal chain will get noisy quickly. Keeping the chain lubricated with petroleum jelly, or something similar, will increase its life but will not maintain quiet.

The belt drive is better than either. It is much quieter because there is no metal rubbing metal. The belt is the same material as the timing belt in your car but doesn’t experience the same RPMs. It is the only one of the three where a life time warranty is given by manufacturers.

One-third Horsepower openers will work on 95% of the doors out there, even ones 16 feet wide. Despite this, manufacturers put all of the bells and whistles on the one-half HP and higher doors such as timed lights and vacation switches. Most of the popular openers are three-fourths horsepower because they are not much more than the lower power openers, provide you with better features, and life time warranties.

There are also DC power motors on the market which allows for battery back-up systems that will open and close your door during power outages. Always makes sure that the locking mechanism on the door is disabled when your opener is operable. If it is not and someone accidentally locks the door, serious damage will be done to the opener and possibly to the door itself. Always makes sure the lift handle is on the bottom of the door inside and out in case the door needs to be worked by hand.

Thomas V. Giel Garage Doors serves a 50-mile radius around Pittsburgh. We handle all your needs when it comes to garage doors and openers! We also provide entry doors and storm doors that are installed in front of the entry door to protect it.

Maintenance on your entry door is essential to keep it looking as beautiful as possible and making sure you don’t have to replace them more frequently than usual. Different materials require a different kind of maintenance and this is everything you need to know!

Steel Doors

Once or twice a year, wash the outside of your door with a mild detergent. It is a good idea to apply a liquid silicone wax at the same time you wash the door. A liquid car wash & wax product that does both in one step works wonders and can be found at most auto part stores. Meguiar’s Ultimate Wash and Wax is a great option!

Remember this rule: If you can use it on your car, you can use it on your door.

If your area uses salt on the roads in the in the winter and your door gets wet, you should rinse the bottom of your door clean to prevent the salty water from hurting your product.

We also recommend that you don’t use a paste wax. Paste waxes tend to dry in the wood grain texture and beveled edges of the door and are difficult to buff out. This leaves behind a dried residue in the low spots which will ruin the aesthetic appeal of your door.

Fiberglass Doors

Apply the clear coat/paint annually or every other year depending upon the amount of sunlight your door receives. The clear coat is a two-part urethane to protect from the sun’s UV rays.

Finish is usually available in pint or gallon size from the manufacturer or a paint shop. We suggest using a water based clear coat. If the clear coat is not maintained, the sun will damage your door similar to a “sun burn” causing it to peel and pull off the stain finish in the process.

The only way to repair this damage is stripping the door completely. Consistent maintenance will prevent this extreme damage from happening.

Wood Doors

Wipe away dust and dirt monthly with furniture polish. On painted wood doors periodically check for blistering, cracking or peeling, particularly around any fixtures on the door.

The painted surface keeps water from damaging the wood. If the paint is coming away or is not sealed, water can soak into the wood and damage it over time.

If your door has a stained finish, check to see if it is still water repellent. If the door is becoming discolored, and water soaks into the wood, it is time to refinish the door. There are chemical treatments on the market that will rejuvenate discolored wood, for example polyurethane clear coat.

Thomas V. Giel Garage Doors serves a 50-mile radius around Pittsburgh. We handle all your needs when it comes to entry doors! We also provide storm doors that are installed in front of the entry door to protect it.

Weather can have different effects on your garage door based on the temperature, precipitation, and how both fluctuate. Here are the 3 ways the cold effects your garage door and what you can do to prevent the problems associated with them.

Problem #1: Steel Contracts

Garage Doors (mostly made of steel) contract in the cold weather. Anything on your garage door that’s made of metal (springs, hinges, track, etc.) can seize up or warp if not moved regularly in the cold.

So, that is why we suggest lubricating things like springs, hinges, rollers and other metal moving parts to keep them working properly. Regular maintenance is an important part of having a functional garage in your home.

Problem #2: Water freezes

The bottom of your garage door seals to the ground in an attempt to block weather and rodents. However, during the winter months when water freezes, this can create a problem if there is any sort of puddling at the bottom of your garage door. Some garage doors can freeze to the ground and will not open if this happens.

To help prevent this, make sure your gutters and any other part of your home surrounding the door is clog free and push away water from the bottom of your garage as much as possible!

Problem #3: Operator Issues

Garage door operators are also susceptible to changes in weather. The moving parts enclosed in garage door openers work best when lubricated and are kept moving regularly (especially during the winter months). In addition, your opener’s sensitivity may also play a factor, if the level is set to “light”. In this case, your operator may interpret the garage door hitting an object, which could halt the garage door suddenly (without anything being in the way at all).

Please make sure you check your operator sporadically to make sure it’s working properly and sensing items through the photo eyes like it should.

Thomas V. Giel Garage Doors serves a 50-mile radius around Pittsburgh. We handle all your needs when it comes to garage doors! We serve residential and commercial , and our maintenance programs help make sure your garage doors work over long periods of time. Contact us today.

Insulation in your residential or commercial garage door is essential if you want to make sure you keep the cold temperatures out of your house. There are two main types of insulation which are Polyurethane and Polystyrene.

Polyurethane

Polyurethane (right) is a polymer composed or organic units joined by urethane links. They were first made by Otto Bayer and his coworkers at IG Farben in Leverkusen, Germany in 1937. It is mostly used in construction, car seating, and furniture but it is used in many other applications.

Polyurethane is sprayed into each panel and makes a very tight fit which will add to the rigidity of the panel when it is new giving it a higher R-Value .

Polyurethane is the more expensive material of the two but doesn’t usually add too much more money to the price of the door. It is important to make sure that the steel skins of the door are not too thin because two things could happen. One, the door will dent easily or two, small waves will appear across the sections and can generally be seen within five feet. This will obviously make the door not look so hot.

Polystyrene

Polystyrene (left) is a synthetic aromatic polymer made from the monomer styrene which is also known as Styrofoam. It is the white brittle material that is frequently used in shipping to protect the goods inside.

Polystyrene is pre-formed to the steel panels and is usually glued to both the front and back of the inside of the panel. It maintains it shape and fits better than open cell polyurethane over a long period of time and does not degrade, deform, or lose R-Value. Most manufactures use closed cell polyurethane negating many of the positives mentioned.

Polystyrene does not fit as tightly as the urethane foam in the end corners of each panel, leaving air pockets. Some manufacturers do not glue their polystyrene to the panels so it does not add to the stiffness of the panels. Generally, this foam results in a lower R-Value for the door.

Of the two materials, polyurethane is the better material. It does have a slight price increase and it’s up to you to decide if it is worth it or not. Regardless, getting insulation is a good choice no matter which material you use.

Thomas V. Giel Garage Doors serves a 50-mile radius around Pittsburgh. We handle all your needs when it comes to garage doors! We serve residential and commercial, and our maintenance programs help make sure your garage doors work over long periods of time. Contact us today!

A garage door is a big purchase (literally) and it’s important to choose the right company to install your door and provide service for years after you buy it. Here is a list of 8 questions to ask about your garage door company before you buy from them.

1. Does the company offer more than one manufacturer?

There are many manufacturers of garage doors across the industry and its important to have variety when deciding which door is best for you. This gives you the most options in terms of styles, material, color, and customization options. A few examples of manufacturers are: Clopay, CHI, Wayne Dalton, and Amarr. If a company only supplies one manufacturer, ask why that is. There could be a scenario of the company getting a kickback if they only offer one vendor (which is an unethical business practice).

2. Have you been advised to visit the company’s and manufacturer’s website?

It is important to do you research on the installation company and the manufacturer of the door to make sure you are being given applicable and truthful information. The door could be produced poorly or the installers could have a bad reputation for mounting the garage doors improperly in your home. This is also good practice to verify that the installers are telling you what the manufacturers intended.

3. Have they informed you about R-Values and what they mean?

R-Value is one of the numbers used to describe how energy efficient a door is. Most manufacturers will display the sectional R-Value and not the installed R-Value which are completely different. Sectional is for one piece of the door and installed is for the whole door. Another misconception is that a double R-Value does not mean it is doubly efficient.

4. Does the company comply with all regulations?

The company and employees are required to adhere to all state and federal guidelines and certifications. These include building codes, the Occupational Safety and Health Administration (OSHA), and the Environmental Protection Agency (EPA). Companies that don’t comply with all regulations could be using unsafe practices while installing doors which can lead to injury for themselves or you if the door is installed incorrectly. There may not be a problem immediately, but something could happen after a year or two

5. What kind of employees are working in your home?

The important thing to discover with this question is how well trained the employees are working in your home. Are they full-time employees of the company or they sub-contractors? Are they trained properly? Such as, have they done on-site training? hands on training? or have they attended conferences with the manufacturers to learn best install techniques? Try to find installers who have the most experience installing the doors and operators in your area to get the best possible service.

6. Are the employees trusted and have your safety in mind?

Garage door safety is important for you, your family, and anyone going inside your garage. These are large pieces of metal or wood and they weigh quite a bit. This is why it is imperative that your installers are dedicated to making sure that safety is a number one priority during the installation and after the job is done. You wouldn’t want the door to come lose, or fall, possibly smash your car or even worse a person. Look for installers that have a long track record with employees that have years of experience installing garage doors & use safe techniques.

7. What kind of mounting hardware will be used?

Quality mounting hardware is essential for a proper garage door installation to ensure safe, smooth, and quite operation. Some companies will cut corners to save money or offer lower prices but this can lead to more problems down the road and won’t be worth the small amount of money you will save when you buy the door initially. You get what you pay for in this industry and if your door is mounted with poor hardware, that can increase the safety concerns & functionality of the doors.

8. Have you received any guarantees or warranties?

A company that stands behind its products and labor goes a long way to building trust with customers. Make sure you receive a written guarantee and warranty on the parts and labor directly on the estimate sheet or work order. If a company doesn’t back up its work, how will you know the safety or manufacturer guidelines were met or not?

Thomas V. Giel Garage Doors serves a 50-mile radius around Pittsburgh. We provide residential and commercial garage doors, entry and storm doors, awnings, and screens. With over 65 years of service, we are the experts you can trust in this industry.

When shopping for a garage door there are four main types of materials to choose from. It is important to be an informed consumer when making large purchasing decisions. Therefore, here is everything you need to know about the pros and cons of each material.

Steel

Steel has a long track record of being used in garage doors since the 40s. Steel doors are stronger and resist twisting and kinking better than other materials.

When looking at a steel door, the most important part is its gauge. The lower the gauge number, the thicker the steel and the more resistant the door will be to dents. Always try to get a door with a 24 gauge.

Some manufacturers will not mention the thickness or will say “nominal” gauge. This means that the door is 30 gauge which is not what you want. You should never buy a door with a gauge higher that 27 as this is the recommended thickness to give you any lasting durability.

The only cons to using a steel door would be dents from hitting the door too hard and possible rusting if the door is not properly maintained by washing the door twice a year. They are the most popular door for use in both residential and commercial applications.

Vinyl

Vinyl doors have been out for around 20 years, but because of low customer satisfaction many installers have stopped selling them. Vinyl is much more elastic than wood or steel which means it expands more in warm temperature and shrinks more in cold temperature.

If you live in an area with variable temperatures and legitimate seasons, you should never consider vinyl because over time the front of your door will be in bad shape with holes and warping.

You should only consider a vinyl door if you live in an area where it is consistently warm and weather changes are not common.

Wood

From the early 50s through the mid-80s, wood doors were most common. They were usually constructed with horizontal wooden rails and vertical styles making a framework to hold floating Masonite (particle board) panels.

After taking a dip in popularity, wood is coming back as a popular option today. Some doors are combined with steel and other have wooden panels with insulation in between.

Wooden doors are considerably more expensive than other materials and take much more to maintain. Staining and painting is required consistently every two to four years.

Despite this, the aesthetic appeal and warm feeling of a wooden door is unsurpassed.

Fiberglass

Fiberglass doors have been around for over 25 years. Using a heavy gauge fiberglass, these doors can come pre-finished in a specific color or stain or they are available in a “stainable” version allowing you to stain the door in whatever color yourself.

Modern fiberglass doors have steel frames and insulation sandwiched between the front fiberglass skin. They can have a realistic wood-like appearance but don’t have the price premium that wood doors currently have. However, fiberglass doors do require a clear coat resealing every one to three years for proper maintenance.

In conclusion, steel doors are the most reliable, have the least amount of maintenance, and are the cheapest of all the materials. Vinyl doors are not recommended unless you live in an area where it is always warm. Wooden doors are the most expensive and require a lot of maintenance, but they have the best aesthetic appeal. Fiberglass can give you the look of wood for less money but still has more maintenance compared to a steel door.

Have more specific questions about a material? Let us know in the comments!

Thomas V. Giel Garage Doors serves the greater Pittsburgh area in all things garage doors. We have maintenance programs for both commercial and residential to keep your doors working like new.